For the hydraulic scissor lift, maintenance is very important, especially in the maintenance should pay attention to a few points, in order to increase the service life of the hydraulic scissor lift, increase the safety performance. Below, with DFLIFFT small make up together to understand the maintenance points of the hydraulic scissor lift!
Maintenance points of hydraulic scissor lift:
1. When installing, disassembling and adjusting the slewing mechanism, pay attention to ensure that the center line of the reducer of slewing mechanism is parallel to the center line of the gear, the meshing surface is not less than 70%, and the meshing gap is suitable.
2. Contact opening and closing of stroke switch of hydraulic scissor lift safety devices must be reliable, and contact arc pit should be polished in time.
3, always check the connection of each part, if there is any loose should be tightened, hydraulic scissor lift body bolt should be checked when the body pressure tightness (can use the method of rotating arm to create pressure), hydraulic lift all connecting shaft must have a cotter pin, and should be fully open.
4. Lubrication of hydraulic scissor lift reducer, gearbox, external meshing gear and other parts and hydraulic oil shall be conducted according to the requirements in the lubrication table.
5, the hydraulic scissor lift should pay attention to check whether the wire rope broken and loose, if more than the relevant regulations must be replaced immediately, the maintenance of wire rope should be in strict accordance with gb5144-85 regulations.
6. Keep the control box and distribution box clean, and clean the dust on the electrical equipment in time.
About the maintenance of hydraulic lift points, DFLIFT small make up to introduce to you here, hope to provide a little help for your work.https://www.scissorliftsmanufacturer.com/hydraulic-scissor-lift/