回到网站

Scissor Man Lift electrical inspection

Electrical inspection of aerial work lifts before use

For the use of machinery such as Scissor Man Lift, there are many precautions during use. These precautions not only help to improve the safety of use, but also extend the service life of Scissor Man Lift. Here, what we are discussing today is the electrical inspection of Scissor Man Lift before use. When performing electrical inspections, the first two standard parts must be installed with lifting equipment before commissioning. After installing and debugging a standard part, the following debugging will be performed.

1. When using a grounding resistance tester to measure the steel structure of an aerial work platform, or using the metal shell of electrical equipment for grounding resistance treatment, one data we should pay attention to is that the grounding resistance should not be exceeded, and only when used within the normal range of use, Grounding resistance will play a more normal use effect.

2. If we use a 500V megohmmeter to measure the motor and use the grounding resistance of electrical components, the normal value should also be used. Once the use standard is exceeded, the use of electrical equipment will occur, thereby shortening the antenna work. The life of the lifting platform truck.

3. For the control switch used on the high-altitude operation elevator, during inspection, the door on each car should be opened so that it can be used once the protection switch of the broken rope or the upper and lower limit switches and limit switches are touched. The effect is good. . The electrical inspection of the high-altitude lift should be checked correctly. Whether it is using the high-altitude work platform before and after use, ensure the normal use of Scissor Man Lift.

https://www.scissorliftsmanufacturer.com/scissor-man-lift/

所有文章
×

快要完成了!

我们刚刚发给你了一封邮件。 请点击邮件中的链接确认你的订阅。

好的订阅由Strikingly提供技术支持。